Fabric Care

Shirts, Hoodies, Sweaters

Washing:

• Machine wash cold (30°C/86°F max) with garments turned inside out.
• Use a gentle cycle with mild detergent.
• Avoid bleach, fabric softeners, and harsh detergents.

Drying:

• Air dry or tumble dry on low heat.
• High heat can crack or fade the printed design.

Ironing:

• Iron inside out at low heat.
• Do not iron directly over the printed design.

Additional Tips:

• Wash separately or with similar colors to avoid color transfer.
• Avoid washing with heavy or abrasive items (like jeans or zippers) to prevent rubbing.

-----------------------------------------------------------------

Shorts & Sweatpants

 

Washing:

• Machine wash cold (30°C/86°F max).

• Use a gentle cycle with similar colors.

• Avoid bleach or harsh detergents.

Drying:

 

• Air drying is recommended to maintain vibrant colors.

• If using a dryer, tumble dry on a low setting.

Ironing:

 

• Use a medium-heat iron as needed.
• Do not iron directly over the printed areas.

Additional Tips:

 

• Avoid prolonged exposure to direct sunlight to prevent fading.
• Do not wring or stretch the fabric excessively.

-----------------------------------------------------------------

Hats & Beanies:

Hats:

Washing:

• Hand wash only.
• Use a small amount of mild detergent mixed with cold or lukewarm water.
• Gently scrub the hat with a soft cloth or sponge to remove dirt.

Drying:

• Do not use a washing machine or tumble dryer, as these can damage the embroidery and structure of the hat.
• Shape the hat and air dry in a well-ventilated area away from direct sunlight.

Additional Tips:

• Avoid soaking the hat for prolonged periods.
• Spot clean when possible to preserve the hat's shape and embroidery quality.
• Do not bleach.

Beanies:

Washing:

• Hand wash or machine wash on a gentle cycle.
• Use cold water to prevent shrinkage and maintain embroidery details.
• Turn the beanie inside out before washing to protect the embroidery.

Drying:

• Air dry by laying flat on a clean towel.
• Do not tumble dry, as high heat can shrink the fabric and warp the embroidery.
• Additional Tips:
• Avoid excessive stretching of the beanie to prevent embroidery distortion.
• Do not bleach or use fabric softeners.

-----------------------------------------------------------------

Shoes

Washing:

Spot Cleaning:

• For light dirt or stains, use a damp cloth with mild soap to gently scrub the shoe's surface.
• Avoid soaking the shoes, especially the mesh areas.

Machine Washing (if necessary):

• Place the shoes in a laundry bag to protect them during the wash cycle.
• Use cold water (maximum 30°C or 86°F) and a gentle cycle.
• Use a mild detergent and avoid bleach or harsh cleaners.
• Turn the shoes inside out if possible to protect the print.

Drying:

Air Drying:

• After washing, remove excess water by blotting with a towel.
• Allow shoes to air dry in a well-ventilated area, away from direct sunlight or heat sources, which can damage the material and print.

Avoid Tumble Drying:

• Do not use a dryer, as high heat can warp the shoes, shrink the mesh, and damage the print.

Ironing:

• Avoid ironing your mesh sneakers, as the heat can cause the material to warp and damage the print.

Additional Tips:

• Clean shoes regularly to prevent dirt build-up, but avoid soaking them in water for extended periods.
• If the shoes have removable insoles, take them out to clean separately for better hygiene.
• Do not expose the shoes to extreme heat or sunlight for long periods to prevent color fading and material degradation.

-----------------------------------------------------------------

Socks

Washing:

Machine Wash:

• Wash in cold water (maximum 30°C or 86°F) to prevent shrinkage and preserve colors.
• Turn the socks inside out to protect the printed design.
• Use a gentle cycle with mild detergent.

Avoid:

• Bleach or harsh detergents, as they can damage the print and fibers.
• Washing with items that have zippers or Velcro, which can snag the fabric.

Drying:

• Air Dry: Lay flat or hang to dry in a shaded area to avoid direct sunlight, which can fade colors.
• Tumble Dry: If necessary, use the lowest heat setting to prevent shrinkage and maintain elasticity.

Additional Tips:

• Wash socks with similar colors to avoid dye transfer.
• Avoid overstretching printed socks, as it may distort the design.

-----------------------------------------------------------------

Stickers

Applying Stickers:

• Clean the surface thoroughly where you plan to apply the sticker (e.g., a smooth, dry surface).
• Use rubbing alcohol or a mild cleaner to remove any dirt, dust, or oils.
• Ensure the surface is dry before applying the sticker.

Application:

• Peel the backing carefully and apply the sticker slowly, starting from one edge and smoothing it down to avoid air bubbles.
• If bubbles form, use a flat tool (like a credit card) to gently push them out.

Washing and Cleaning (after application):

• Avoid Scrubbing: For surfaces with stickers, clean them gently using a damp cloth. Avoid abrasive scrubbing, which can scratch the sticker or remove the design.

Surface Type Considerations:

• Stickers on non-porous surfaces like laptops, water bottles, or smooth glass can be wiped with a damp cloth.
• Avoid using harsh chemicals, solvents, or bleach, as they can damage the print.

Outdoor Stickers:

• Stickers are water-resistant but not entirely waterproof. Avoid submerging them in water for long periods.
• For items exposed to harsh weather (like car bumpers), ensure they are placed in areas that won’t be overly exposed to direct sun or abrasive elements for extended periods.

Avoid High Heat:

• Stickers can become damaged under extreme heat or sunlight over time.
• Keep them out of prolonged exposure to high temperatures.

Peeling Off Stickers:

• If you need to remove the sticker, gently peel it from the edge. If it's stubborn, apply a small amount of heat (like from a hairdryer) to soften the adhesive, making removal easier.
• Clean the surface afterward to remove any leftover adhesive residue.